Inverters

A convenient kit, bundled with all the products you need for installation. Power inverters have become a staple in businesses and homes around the world due to intermittent brown and black-outs. AIMS pure sine wave power inverters provide reliable transformation of DC power from a battery (such as the one in a car or RV) into AC power that can then be used to run lights, computers, printers, televisions, medical equipment* and a broad range of appliances. And when it comes to selecting an inverter, it’s helpful to know that AIMS pure sine wave inverters represent the most technologically advanced, lightweight, compact and diverse inverters on the market to help ensure the widest use of applications. For over a decade, the AIMS’ Power has consistently delivered the broadest range of sizes to accommodate virtually every power requirement. Advantages of a pure sine inverter: -Equipment runs more efficiently -Motors run cooler -Cleaner power -Ideal for power tool chargers, laser printers, electric shavers, microwaves, variable speed motors, TV’s, medical equipment

Highlight:★ Solar Inverter: 6000W DC 48V Split Phase Low Frequency Inverter, AC input 240V AC, AC Output 120V/240V, MPPT Max 120A solar charger and 120A AC charger★ Parallel Kit: parallel support up to 9 units (54KW Max), 120V/240V split phase output without needing to parallel★ WIFI Model : Built-in WIFI transmitter for monitoring on iPhones and Androids★ Batteryless support: the inverter can power the loads from PV array / ac grid without battery connected ( single unit support)★ BMS Support: BMS (RS485, CAN-BUS, RS232) communication ports support for Pylontech, Soltaro and Weco battery systems★ Grid Feedback: Grid Injection may be enabled to feed excess PV power to grid  (note: be sure to check with local authority for approval before application)FeaturesMain Features:Genset starter dry contactExtensive programmable functionsAdjustable bulk/float/low cut off settingSupport either grid or generator inputLCD + LED indicatorsFREE monitoring softwareParallel up to 9 unitsBuilt-in WIFI transmitter for monitoring on iPhones and AndroidBMS COMMUNICATION (Pylontech / Soltaro / WECO BMS systems are supported)Battery Optional：use PV panels straight to loadSpecificationSpecification：User ManualDownload Hybrid Solar Inverter Charger User’s ManualFAQ

Highlight: ★ LF-PV Series Pure Sine Wave Inverter is a combination of a 10000-watt inverter, AC charger, and Auto-transfer switch into one complete system.★ The split-phase inverter requires 240VAC input and can provide 120VAC or 240VAC output power for all kinds of appliances, and it can output 50 or 60Hz via the SW4.★ AC/Battery Priority: Our inverter is designed with AC priority by default, you can choose the battery priority by SW5 switch.★ Features: Smart Remote Control, Automatic Generator Starting (AGS), Suitable for different kinds of batteries.★ Application: for all kinds of loads: refrigerators, freezers, microwaves, dryers, air conditioners, pumps, and all the big home and business applications.FeaturesYou can disable the inbuilt solar controller, connect with the external solar controller, or use it for other systems (it is not limited to the solar systems)Main Features:10KW split phase pure sine inverter charger DC 24V AC 240V input AC output 120V/240VAuto Generator Start (AGS)Support Solar Panel with MPPT FunctionInclude Battery Temperature Sensor (BTS) and Remote Control8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM, and lead Acid batteries）Compatible With All kinds of Home & Office AppliancesPowerful Charge Rate Up to 120Amp, Selectable From 0%-100%Built-in transfer switch and battery charge, backup, or off-grid power solutionsAC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger8 ms Typical Transfer Time Between Utility & Battery, Ensure Power Continuity15s Delay Before Transfer when AC Recover, Protection for Load when Used with GeneratorPackaging:10000W 24V Split Phase Pure Sine Wave Solar Power InverterEnglish ManualRemote ControlBTS CableUnit Weight: 145.5 LB Unit Size: 26.37 x 14.96 x 7.87 inchShipping Weight: 175.2LB Shipping Size:  32.67 x 21.25 x 15.35 inchSpecificationMain Specification：Continuous Output Power:10.0KWSurge Rating(20s) :30.0KWOutput Waveform:Pure Sine WaveAC Output Voltage: 120V and 240VAC Input Voltage:240V( not suitable for AC 120V input )DC Battery Voltage:24VdcSolar charger Current:60AmpAC Battery charger:120±5AmpOutput Frequency:50Hz /60HzTypical transfer Time:10ms(Max)DC Input:Nominal Input Voltage:24.0VdcMinimum Start Voltage:20.0Vdc / 21.0VdcLow Battery Alarm:21.0Vdc / 22.0VdcLow Battery Trip:20.0Vdc / 21.0VdcHigh Voltage Alarm:32.0VdcLow Battery voltage recovery:31.0VdcPower Saver on Idle Consumption: 35WPower Saver off Idle Power:150WCharger :Output Voltage: Depends on battery typeBattery Initial Voltage for Start-Up: 20-31.4VOver Charge Protection Shutdown:31.4VCharger Breaker: 80AInput Voltage Waveform: Pure Sine wave (Grid or Generator)AC input range:184-253Vac/140-270VacNominal Input Frequency :50Hz or 60Hz (Auto detect)Solar Charger controller:(you can disable our solar controller, and connect with an external solar controller）Solar Input Voltage Range: 30-145VdcMax.PV Open Circuit Array Voltage:145VdcRated Charge Current:60AOver Charge Disconnection: 29.6VOver Charge Recovery:27.2VOver Discharge Disconnection:21.6 V(default)Over Discharge Reconnection:24.6VUser ManualDownload LF-PV Series Pure Sine Wave Inverter User's ManualFAQFrequently Questions Answer1. How do you connect this to a home with the multiple-phase system?    Dear Customer, it only has dual phase output, 120V, and 240V, it can't work with the multiple phase system, thanks.2. Does this unit work with lithium batteries? Is there an adjustable curve for charge-discharge voltages?    Dear Customer, it's ok to work with lithium batteries, LiFePO4 in types is for lithium batteries, in addition, we are sorry to advise the charge and discharge voltage can't be adjusted, hope for your kind understanding, thanks.  

Our line of ETL listed to UL 48 Volt DC split phase 120/240 Volt AC inverter chargers is the power house for back up, off grid systems. Built with a 48 Volt DC input, these inverter chargers perform with very little power loss. Users receive a notable increase in efficiency in large systems when compared to using inverters that accept 12 or 24 volts. This can be an attractive feature for sustainability lovers looking to live as efficiently as possible. The most common use for this inverter is emergency backup power for residences and businesses. You’ll always be prepared for the next power outage with access of up to 12,000 watts (depending on model) of continuous power and 36,000 watts of surge (for up to 20 seconds). We recommend recharging your battery bank with AIMS Power solar panels — a cleaner form of power. One of the most sought-after features this inverter has is the direct-connect terminal block, which allows users to surpass the 8Kw or 12Kw capacity and harness its 300% surge power (up to 24Kw or 36Kw watts for 20 seconds as previously noted). Have a hunting cabin or off-grid vacation home? This AIMS Power inverter charger is perfect for supplying reliable electricity to the entire house. This inverter is also built to withstand reasonable heat and temperature fluctuations because of its over-temperature protection and dual thermally…> Read More