Reno, NV

  • No ratings found yet!
    259Products found
    View
    Filter
    • $39.10

      Smart Battery Sense Long Range (Up to 10m)

      Sold By: Reno, NV

      Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.

    • $39.95

      3M Thermister WS500 BT-K

      Sold By: Reno, NV

      3-meter cable with 2-wire waterproof connector (attaches to regulator wiring harness) and tinned temperature-sensor lug.

    • $40.00

      Mounting Bracket Kit for BBGC3

      Sold By: Reno, NV

      The BBGC3 Mounting Bracket Kit comes with six (6) L-shaped mounting brackets designed specifically for our BBGC3. You will also receive (18) Screws to mount the GC3 to your designated surface and (18) M5 25mm screws to hold the bracket to your GC3 feet. To install the mounting and bracket screws, please use a Phillips standard screwdriver (pictured below).

    • $45.00

      Redarc 30A Fuse Kit

      Sold By: Reno, NV

      The REDARC 30A Fuse Kit is equipped with high-quality fuses and a fuse holder to fit the cable required for the specified current and make a solid connection. This ensures your installation is working safely and efficiently. Poor quality fuse holders typically don’t make enough contact with the fuse, which allows dirt and other elements to get in between contact points. This generates excess heat, which can be enough to melt both the fuse and the holder. Avoid fuse problems with a REDARC Fuse Kit. The kits are offered in 23A, 30A, 40A and 60A versions and are designed for dc to dc charger installations. The FK30 is also perfectly suited for use with the BCDC1212 trailer battery charger output.

    • $45.00

      Redarc 23A Fuse Kit

      Sold By: Reno, NV

      The REDARC 23A Fuse Kit is equipped with high-quality fuses and a fuse holder to fit the cable required for the specified current and make a solid connection. This ensures your installation is working safely and efficiently. Poor quality fuse holders typically don’t make enough contact with the fuse, which allows dirt and other elements to get in between contact points. This generates excess heat, which can be enough to melt both the fuse and the holder. Avoid fuse problems with a REDARC Fuse Kit. The kits are offered in 23A, 30A, 40A, and 60A versions and are designed for dc to dc charger installations. The FK23 is also perfectly suited for use with the BCDC1212 trailer battery charger input.

    • $49.30

      VE.Direct Smart Dongle

      Sold By: Reno, NV

      The VE.Direct to Bluetooth Smart dongle allows you to display your BMV or MPPT information on iOS and Android devices by using the VictronConnect app. With the Victron VE.Direct Bluetooth Smart Dongle, you can view information wirelessly! Important information like battery status and solar panel power will reduce your overall battery anxiety.

    • $49.95

      8M Thermistor WS500 LT-K

      Sold By: Reno, NV

      Long length (8-meter) Temperature Sensor Kit. May be used for either Alternator or Battery Temperature Sensor.

    • $56.95

      Busbar 250A 4P + Cover

      Sold By: Reno, NV

      Busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment. Each busbar is fitted out with a removable protection cover.

    • $62.90

      Victron Battery Balancer

      Sold By: Reno, NV

      The Victron Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries. When the charge voltage of a 24V battery system increases to more than 27V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge.