Uncategorized
-
$2,499.00
270Ah 12V LiFePO4 Deep Cycle GC3 Battery
The powerful battery solution to elevate any outdoor adventure. It’s time to upgrade from your traditional lead acid battery! What you need is a new battery that’s lighter, safer, and works with various systems. More importantly, it should be able to keep you company for many of your outdoor adventures! This 270Ah 12V GC3 LiFePO4 Deep Cycle Battery by Battle Born Batteries delivers superior and long-lasting performance!
$945.00100Ah 12V GC2 LiFePO4 Deep Cycle Battery
The powerful battery solution to elevate any outdoor adventure. It’s time to upgrade from your traditional lead acid battery! What you need is a new battery that’s lighter, safer, and works with various systems. More importantly, it should be able to keep you company for many of your outdoor adventures! This 100Ah 12V GC2 LiFePO4 Deep Cycle Battery by Battle Born Batteries delivers superior and long-lasting performance!
$65.00Redarc 60A Fuse Kit
The REDARC 60A Fuse Kit is equipped with top quality fuses and fuse holders to fit the cable necessary for the specified current and make a solid connection. This provides a safe and efficient installation. A common problem customers often face is the use of poor quality fuse holders. When a fuse holder doesn’t make the right contact with a fuse, there is room for dirt and dust to affect the contact points. As a result, excess heat is generated which can melt both the fuse and the holder.Prevent fuse problems with a REDARC Fuse Kit. The kit is offered in a 40A version as well and both are designed for BCDC installations. The REDARC 100A version is designed for SBI installations. Each fuse kit comes with (2) fuse holders, (4) 40A fuses, cable crimps, and a detailed instruction sheet.
$7,727.79Battle Born Energy Sailboat 24V Kit
Created with sailboats in mind, these 24V sailboat kits are some of the best lithium marine system out there. This 24V kit comes with 100Ah 12V deep cycle lithium batteries and supporting Victron and Sterling components, perfect for any sailing vessel. Battle Born Batteries come with a water resistant seal and are designed to handle vibrations.
$410.00Progressive Dynamics Replacements 4500 Series 90 Amp Lithium Converter
Made in the USA, this converter replacement can upgrade your 90-amp Progressive Dynamics 4500 series Power Control Center to a lithium converter. Converter chargers change AC shore power to DC power to run 12V loads and charge your lithium RV batteries. With a high voltage output that provides full, quick charges for lithium batteries, its built-in safety features protect your electrical system.
$508.00Redarc DC-DC Charger 12V 40A In-Vehicle DC-DC Battery Charger
The REDARC BCDC1240D is a 12V, 40A In-vehicle DC to DC Battery Charger designed to keep your auxiliary battery charged when driving or with portable solar panels when parked. It uses multi-stage DC-DC charging, a system that allows optimum charging levels for your auxiliary battery. Dual Battery Charger with solar input The DC to DC battery charger works from a wide operating range (9-32V) and provides the option of charging from both 12V and 24V vehicle systems. Additional features include a Maximum Power Point Tracking (MPPT) solar regulator, which allows the maximum amount of power to be delivered from your solar panels to your auxiliary battery.
$562.00Redarc DC-DC Charger 12V 50A In-Vehicle DC-DC Battery Charger
The REDARC BCDC1250D is a 12V, 50A In-vehicle DC to DC Battery Charger designed to keep your auxiliary battery charged when driving or with portable solar panels when parked. It uses multi-stage DC-DC charging, a system that allows optimum charging levels for your auxiliary battery. The BCDC1250D has been developed to provide a higher current output, it features an additional charging stage known as SoftStart, which has been engineered so that it can handle more demanding applications. Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1250D will charge from both solar and the alternator simultaneously. And, with built-in Green Power Priority, it will select solar charging first, meaning less load on the alternator.
$551.00Redarc DC-DC Charger 24V 20A In-Vehicle DC-DC Battery Charger
The REDARC BCDC2420 In-vehicle Dual Battery Charger is a 3-stage, 24V, 20A, DC to DC charger that operates from a vehicle input between 9 and 32 Volts DC. Its multi-stage charging algorithm works well for trucking applications such as charging battery banks for tailgate lifters and side curtains. Its design is suited to charge commonly operated automotive 24V battery systems to optimal levels. The DC to DC charger also features a MPPT Solar Regulator, which uses 12V solar panels to charge your 24V auxiliary batteries. It’s compact and fully sealed to block out water, dust, and vibration. The in-vehicle dual battery charger is equipped to handle the roughest roads and rockiest terrains, and is built to work in extreme heat, functioning in temperatures up to 176°F. It charges AGM, gel, calcium content, VRLA, and standard lead acid batteries. The durability and reliability of the in-vehicle dual battery charger are benefits you can count on to keep you up and running even during the most tumultuous conditions. The BCDC range charges your auxiliary battery banks to 100% while on the move from one adventure to the next.
$45.00Redarc 30A Fuse Kit
The REDARC 30A Fuse Kit is equipped with high-quality fuses and a fuse holder to fit the cable required for the specified current and make a solid connection. This ensures your installation is working safely and efficiently. Poor quality fuse holders typically don’t make enough contact with the fuse, which allows dirt and other elements to get in between contact points. This generates excess heat, which can be enough to melt both the fuse and the holder. Avoid fuse problems with a REDARC Fuse Kit. The kits are offered in 23A, 30A, 40A and 60A versions and are designed for dc to dc charger installations. The FK30 is also perfectly suited for use with the BCDC1212 trailer battery charger output.
$65.00Redarc 40A Fuse Kit
The REDARC 40A Fuse Kit is equipped with high-quality fuses and fuse holders to fit the cable required for the specified current and make a solid connection. This ensures your installation is working safely and efficiently. Poor quality fuse holders typically don’t make enough contact with the fuse, which allows dirt and other elements to get in between contact points. This generates excess heat, which can be enough to melt both the fuse and the holder.
$45.00Redarc 23A Fuse Kit
The REDARC 23A Fuse Kit is equipped with high-quality fuses and a fuse holder to fit the cable required for the specified current and make a solid connection. This ensures your installation is working safely and efficiently. Poor quality fuse holders typically don’t make enough contact with the fuse, which allows dirt and other elements to get in between contact points. This generates excess heat, which can be enough to melt both the fuse and the holder. Avoid fuse problems with a REDARC Fuse Kit. The kits are offered in 23A, 30A, 40A, and 60A versions and are designed for dc to dc charger installations. The FK23 is also perfectly suited for use with the BCDC1212 trailer battery charger input.
$14.00Redarc Battery to Fuse Holder Cable
The REDARC KIT19 is a pre-terminated battery to fuse cable capable of distributing 50 Amps when connecting REDARC’s range of MIDI fuse kits to a battery positive terminal, and can be used on both start and auxiliary batteries. The short length combined with a Fuse Kit provide protection of the wiring connected and minimizes voltage drop. It is compatible with all REDARC dc to dc chargers, battery management systems, In-vehicle Power Supply and Charge Equalizer products.
$15.00User-Friendly BBGC3 Foot Replacement Kit
The BBGC3 Foot Replacement Kit comes with three (3) feet designed specifically for our BBGC3. With nothing more than a #3 Allen wrench, the foot replacement of your BBGC3 battery is as easy and as user-friendly as possible. Having a spare BBGC3 foot replacement kit that is easily storable and user-friendly is always a great idea for any user.
Barry P. Battery Specialist • OnlineHi there! 👋 How can I help you today?
