Highlight: ★ LF-PV Series Pure Sine Wave Inverter is a combination of a 10000-watt inverter, AC charger, and Auto-transfer switch into one complete system.★ The split-phase inverter requires 240VAC input and can provide 120VAC or 240VAC output power for all kinds of appliances, and it can output 50 or 60Hz via the SW4.★ AC/Battery Priority: Our inverter is designed with AC priority by default, you can choose the battery priority by SW5 switch.★ Features: Smart Remote Control, Automatic Generator Starting (AGS), Suitable for different kinds of batteries.★ Application: for all kinds of loads: refrigerators, freezers, microwaves, dryers, air conditioners, pumps, and all the big home and business applications.FeaturesYou can disable the inbuilt solar controller, connect with the external solar controller, or use it for other systems (it is not limited to the solar systems)Main Features:10KW split phase pure sine inverter charger DC 24V AC 240V input AC output 120V/240VAuto Generator Start (AGS)Support Solar Panel with MPPT FunctionInclude Battery Temperature Sensor (BTS) and Remote Control8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM, and lead Acid batteries）Compatible With All kinds of Home & Office AppliancesPowerful Charge Rate Up to 120Amp, Selectable From 0%-100%Built-in transfer switch and battery charge, backup, or off-grid power solutionsAC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger8 ms Typical Transfer Time Between Utility & Battery, Ensure Power Continuity15s Delay Before Transfer when AC Recover, Protection for Load when Used with GeneratorPackaging:10000W 24V Split Phase Pure Sine Wave Solar Power InverterEnglish ManualRemote ControlBTS CableUnit Weight: 145.5 LB Unit Size: 26.37 x 14.96 x 7.87 inchShipping Weight: 175.2LB Shipping Size:  32.67 x 21.25 x 15.35 inchSpecificationMain Specification：Continuous Output Power:10.0KWSurge Rating(20s) :30.0KWOutput Waveform:Pure Sine WaveAC Output Voltage: 120V and 240VAC Input Voltage:240V( not suitable for AC 120V input )DC Battery Voltage:24VdcSolar charger Current:60AmpAC Battery charger:120±5AmpOutput Frequency:50Hz /60HzTypical transfer Time:10ms(Max)DC Input:Nominal Input Voltage:24.0VdcMinimum Start Voltage:20.0Vdc / 21.0VdcLow Battery Alarm:21.0Vdc / 22.0VdcLow Battery Trip:20.0Vdc / 21.0VdcHigh Voltage Alarm:32.0VdcLow Battery voltage recovery:31.0VdcPower Saver on Idle Consumption: 35WPower Saver off Idle Power:150WCharger :Output Voltage: Depends on battery typeBattery Initial Voltage for Start-Up: 20-31.4VOver Charge Protection Shutdown:31.4VCharger Breaker: 80AInput Voltage Waveform: Pure Sine wave (Grid or Generator)AC input range:184-253Vac/140-270VacNominal Input Frequency :50Hz or 60Hz (Auto detect)Solar Charger controller:(you can disable our solar controller, and connect with an external solar controller）Solar Input Voltage Range: 30-145VdcMax.PV Open Circuit Array Voltage:145VdcRated Charge Current:60AOver Charge Disconnection: 29.6VOver Charge Recovery:27.2VOver Discharge Disconnection:21.6 V(default)Over Discharge Reconnection:24.6VUser ManualDownload LF-PV Series Pure Sine Wave Inverter User's ManualFAQFrequently Questions Answer1. How do you connect this to a home with the multiple-phase system?    Dear Customer, it only has dual phase output, 120V, and 240V, it can't work with the multiple phase system, thanks.2. Does this unit work with lithium batteries? Is there an adjustable curve for charge-discharge voltages?    Dear Customer, it's ok to work with lithium batteries, LiFePO4 in types is for lithium batteries, in addition, we are sorry to advise the charge and discharge voltage can't be adjusted, hope for your kind understanding, thanks.  

This 1250 watt 12 volt power inverter by AIMS Power converts DC (direct current) power stored by batteries into AC (alternating current) electricity that can be used to run practically any small household appliances or tools.