12000W 48V Split Phase Pure Sine Wave Inverter Charger

 Highlight:★ LF-PV Series Pure Sine Wave Inverter is a combination of a 48-volt inverter, AC charger, and Auto-transfer switch into one complete system (without MPPT).★ The split-phase inverter requires 240VAC input and can provide 120VAC or 240VAC output power for all kinds of appliances, and it can output 50 or 60Hz via the SW4.★ AC/Battery Priority: Our inverter is designed with AC priority by default, you can choose the battery priority by SW5 switch.★ Features: Smart Remote Control, Automatic Generator Starting (AGS), Suitable for different kinds of batteries.★ Application: for all kinds of loads: refrigerators, freezers, microwaves, dryers, air conditioners, pumps, and all the big home and business applications.Main Features:12KW split phase pure sine inverter charger DC 48V AC 240V input AC output 120V/240VAuto Generator Start (AGS)Support Solar Panel with MPPT FunctionInclude Battery Temperature Sensor (BTS) and Remote Control8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM, and lead Acid batteries）Compatible With All kinds of Home & Office AppliancesPowerful Charge Rate Up to 120Amp, Selectable From 0%-100%Built-in transfer switch and battery charge, backup, or off-grid power solutionsAC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger8 ms Typical Transfer Time Between Utility & Battery, Ensure Power Continuity15s Delay Before Transfer when AC Recover, Protection for Load when Used with GeneratorPackaging:12000W 48V Split Phase Pure Sine Wave Solar Power InverterEnglish ManualRemote ControlBTS CableUnit Weight: 160 LB Unit Size: 26.37 x 14.96 x 7.87 inchShipping Weight: 190 LB Shipping Size:  32.67 x 21.25 x 15.35 inchSpecificationMain Specification：Continuous Output Power: 12.0KWSurge Rating(20s): 36.0KWOutput Waveform: Pure Sine WaveAC Output Voltage: 120V and 240VAC Input Voltage: 240V ( not suitable for AC 120V input )DC Battery Voltage: 48VdcSolar charger Current: 60AmpAC Battery charger: 120±5AmpOutput Frequency: 50Hz /60HzTypical transfer Time: 10ms(Max)DC Input:Nominal Input Voltage: 48.0VdcMinimum Start Voltage: 40.0Vdc/ 42.0VdcLow Battery Alarm: 42.0Vdc / 44.0VdcLow Battery Trip: 40.0Vdc / 42.0VdcHigh Voltage Alarm: 64.0VdcLow Battery voltage recovery: 62.0VdcPower Saver on Idle Consumption: 40WPower Saver off Idle Power: 180WCharger :Output Voltage: Depends on battery typeBattery Initial Voltage for Start-Up: 40-62.8VOver Charge Protection Shutdown: 62.8VCharger Breaker: 80AInput Voltage Waveform: Sine wave (Grid or Generator)AC input range:184-253Vac/140-270VacNominal Input Frequency :50Hz or 60Hz (Auto detect)Solar Charger controller:  (you can disable our solar controller, and connect with an external solar controller）Solar Input Voltage Range: 60-100VdcMax.PV Open Circuit Array Voltage: 105VdcRated Charge Current: 60AOver Charge Disconnection: 59.2VOver Charge Recovery: 54.4VOver Discharge Disconnection: 43.2 V(default)Over Discharge Reconnection: 49.2VUser ManualDownload LF-PV Series Pure Sine Wave Inverter User's ManualFAQFrequently Questions Answer1. How do you connect this to a home with the multiple-phase system?    Dear Customer, it only has dual phase output, 120V, and 240V, it can't work with the multiple phase system, thanks.2. This inverter can use 240v, and 120v at the same time?    Dear Customer, if you need to have 240V & 120V load at the same time, HOT1 will have 2cables connected, but please note that 120V load power cannot exceed 50% of the inverter's real power, it is only 6000W if 120V output, hope your kind understanding, thanks.3. What is the power consumption of the inverter with no load?    Dear Customer, the power saver on idle consumption is 40W and the power saver off idle power is 180W, thanks.