Inverters

Highlight:★ LF-PV Series Pure Sine Wave Inverter is a combination of an inverter, AC charger, and Auto-transfer switch into one complete system (without MPPT). ★ The split-phase inverter requires 240VAC input and can provide 120VAC or 240VAC output power for all kinds of appliances, and it can output 50 or 60Hz via the SW4.★ AC/Battery Priority: Our inverter is designed with AC priority by default, you can choose the battery priority by SW5 switch.★ Features: Smart Remote Control, Automatic Generator Starting (AGS), suitable for different kinds of batteries.★ Application: for all kinds of loads: refrigerators, freezers, microwaves, dryers, air conditioners, pumps, and all the big home and business applications.Main Features:18KW split phase pure sine inverter charger DC 48V AC 240V input AC output 120V/240VAuto Generator Start (AGS)Support Solar Panel with MPPT FunctionInclude Battery Temperature Sensor (BTS) and Remote Control8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM, and lead Acid batteries）Compatible With All kinds of Home & Office AppliancesPowerful Charge Rate Up to 120Amp, Selectable From 0%-100%Built-in transfer switch and battery charge, backup, or off-grid power solutionsAC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger8 ms Typical Transfer Time Between Utility & Battery, Ensure Power Continuity15s Delay Before Transfer when AC Recover, Protection for Load when Used with GeneratorPackaging:18000W 48V Split Phase Pure Sine Wave Solar Power InverterEnglish ManualRemote ControlBTS CableUnit Weight: 204.5 LB Unit Size: 28.34 x 15.35 x 9.03 inchShipping Weight: 233.7 LB Shipping Size:  34.64x 21.65 x 16.53 inchSpecificationMain Specification：Continuous Output Power:18.0KWSurge Rating(20s) :54.0KWOutput Waveform:Pure Sine WaveAC Output Voltage: 120V and 240VAC Input Voltage:240V( not suitable for AC 120V input )DC Battery Voltage:48VdcSolar charger Current:40AmpAC Battery charger:100±5AmpOutput Frequency:50Hz /60HzTypical transfer Time:10ms(Max)DC Input:Nominal Input Voltage:48.0VdcMinimum Start Voltage:40.0Vdc / 42.0VdcLow Battery Alarm:42.0Vdc / 44.0VdcLow Battery Trip:40.0Vdc / 42.0VdcHigh Voltage Alarm:64.0VdcLow Battery voltage recovery:62.0VdcPower Saver on Idle Consumption: 50WPower Saver off Idle Power: 270WCharger :Output Voltage: Depends on battery typeBattery Initial Voltage for Start-Up: 40-62.8VOver Charge Protection Shutdown:62.8VCharger Breaker: 100AInput Voltage Waveform: Pure Sine wave (Grid or Generator)AC input range:184-253Vac/140-270VacNominal Input Frequency :50Hz or 60Hz (Auto detect)Solar Charger controller:(you can disable our solar controller, and connect with an external solar controller）Solar Input Voltage Range: 60-100VdcMax.PV Open Circuit Array Voltage:105VdcRated Charge Current: 40AOver Charge Disconnection: 59.2VOver Charge Recovery: 54.4VOver Discharge Disconnection: 43.2 V(default)Over Discharge Reconnection: 49.2VUser ManualDownload LF-PV Series Pure Sine Wave Inverter User's ManualFAQFrequently Questions Answer1. How do you connect this to a home with the multiple-phase system?    Dear Customer, it only has dual phase output, 120V, and 240V, it can't work with the multiple phase system, thanks.2. Does this unit work with lithium batteries? Is there an adjustable curve for charge-discharge voltages?    Dear Customer, it's ok to work with lithium batteries, LiFePO4 in types is for lithium batteries, in addition, we are sorry to advise the charge and discharge voltage can't be adjusted, hope for your kind understanding, thanks. 

 Highlight:★ All in one unit: 8KW Pure Sine Wave Solar Inverter Combined with Max 200A battery charging, 2 MPPT Solar controller inbuilt, Max.Voltage of Open Circuit : 500VDC, Split phase (120V/240V) or Single phase (120v) output. Wifi module is included, which allows the user to view the operating status and parameters of the inverter via the mobile phone APP,UL1741 Listed by ETL.★ Parallel Kit: Parallel 6 units up to 48kw power output, you will get 120V single phase / 120V/240V Split Phase or 208V 3-Phase Support (more than 3 unit in parallel), increases the inverter power and surge capacity.★ Stable AC output and Smart Protection: Rated Output Power:8000W, Max Peak Power:16,000W, loaded motor capacity 6HP, PV input over-voltage/current protection, AC input over-voltage protection, Battery over-voltage protection,Over-load protection and so on.★ Four charging / Output modes: Hybrid Charging / Utility Priority Charging / Solar Priority Charging / Only Solar Charging, 4 output modes:  Utility Priority / Solar and Utility Hybrid / Solar Priority / Inverter Priority to meet your different requirements.★ Time-slot charging/discharging function: The SPH series is equipped with a time-slot charging and discharging function, which allows users to set different charging and discharging periods according to the local peak and valley tariffs, so that the utility power and PV energy can be used rationally.★ Battery type: 48V AGM/Sealed, Gel, Flooded, Lithium batteries and a User Mode to work with all battery types. and supports battery-free. When the lithium battery is dormant, the mains power and photovoltaics can activate the lithium battery. Support Can, USB and RS485 communication with SunGoldPower batteries.

Highlight:★ This LFP Series 2000 Watt Pure Sine Wave Inverter is a combination of an inverter, battery charger, and AC auto-transfer switch. Low frequency, low Idle Current, BTS cable, remote control.★ This 2000-watt inverter requires 120VAC input and can provide 120VAC output power for the appliances, and it can output 50 or 60Hz via the SW4.★ AC/Battery Priority: Our inverter is designed with AC priority by default, you can choose the battery priority by SW5 switch.★ Adjustable Charging Current: The max charge current can be adjusted from 0%-100% via a liner switch. ★ Auto Gen Start: The inverter can start up a generator when the battery voltage goes low, and turn the generator off after battery charging is finished.FeaturesMain Features:2000W LFP Low-Frequency Pure Sine Inverter With Charger.AC/Battery Priority Selector.Automatic Generator Start.GFCI Socket, Safety and Convenient.The low-frequency inverter can power all kinds of appliances.LCD Display, Remote Control, BTS including.Low Idle Consumption.7 battery type settings for the charger.Multi Stage Smart charger 70+/-5A, the charger can be disabled.10 msec typical transfer time.Packaging:2000W 12V Low-Frequency Pure Sine InverterEnglish ManualRemote ControlBTS CableUnit Weight: 53LBUnit Size: 17.4 x 9.5 x 7.8 inchShipping Weight: 57LBShipping Size: 23 x 12.6 x 12.0 inchSpecificationInverter Output: Continuous Output Power: 2000W Surge Rating: 6000W (20 Seconds)Output: 120VAC, 60hz Output Wave: Pure Sine Wave (bypass mode)Typical Transfer Time: 10ms (MAX)Nominal Efficiency: >88%DC Input:Nominal Input Voltage: 12.0VdcMinimum Start Voltage: 10.0VdcLow Battery Alarm: 10.5Vdc-11.0VdcLow battery Trip: 10.0Vdc-10.5Vdc (select by SW1)High Voltage Alarm: 16.0VdcLow battery Voltage Restart: 13VdcIdle Consumption: 25WPower Saver Mode Idle Consumption: 12WAC Charger:Charger Rate: 70+/-5AAC input Range (Grid or Generator): 90V-135VAC/100V-135VAC (select by SW2); Over Charge Protection Shutdown:15.7VSelectable Charge Setting: off 0%-100%3-step intelligent battery chargerUser ManualDownload LFP Series Pure Sine Wave Inverter/Charger User's ManualFAQFrequently Questions Answer1. What is the standby/idle current draw of the inverter on 12V?    Dear Customer, the standby current is 2A for this product, thanks.2. What gauge wire should be used for the chassis ground?    Dear Customer, it requires AWG1/0 wire, thanks.3. In battery priority, when the battery is depleted, it will switch to AC/charger mode? When the battery is recharged, it will switch back to the battery/inverter?    Dear Customer, it's the same as you described.