Uncategorized
-
$68.00
15 Amp 24V to 12V DC-DC Converter
This compact step-down DC-DC converter has an input voltage of 24 VDC nominal (range 20 VDC to 37 VDC) to a highly regulated output voltage of 12 VDC nominal at 15 Amps. This a non-isolated 15 amp DC-DC converter and is made for use in negative ground systems. These units have CE EN61000-6-3:2007+A1:2011 and CE EN61000-6-1:2007
$45.00Battery Temperature Sensor
This is the AIMS Power Battery Temperature Sensor for the Low Frequency Inverters models. This allows careful monitoring of the batteries for extended life and longevity.
$649.00*NEW MODEL COMING SOON! * Lithium Battery 12V 100Ah LiFePO4 Lithium Iron Phosphate with Bluetooth Monitoring
AIMS Power introduces its new battery product line of LiFePO4 batteries. The LiFePO4 batteries maintain constant output voltage, providing more efficient power. This allows the cell to deliver virtually full power until it is fully discharged without harming the battery, and it can greatly simplify or even eliminate the need for voltage regulation circuitry. The battery has a much longer cycle life capacity, and is easier to maintain compared to other battery technologies. The LiFePO4 technology has better thermal and chemical stability, which improves battery safety and packed with power in a small and lightweight footprint. Easily uses the same space as your existing 12V battery and replaces lead acid, AGM or Gel battery applications in RVs, golf carts, boats, commercial vehicles, off grid back up power and much more. Not intended to replace starting batteries. Backed by a battery cell IEC rating that specifies requirements and tests for the safe operation of secondary lithium cells and batteries used in industrial applications including stationary applications.
$2,254.00SINGLE POLE MOUNT RACK for PV SOLAR PANELS HEAVY DUTY – Fits 6
The AIMS Power Heavy Duty Solar Single Pole Mount Rack is made for the avid solar system seeker. Holding up to 6 large PV solar panels (up to 2.0 KW). This system can hold more panels depending on panel size. The heavy duty single pole rack is made of high quality, structural grade, corrosion resistant steel. The aluminum clamps and HD rails along with the stainless steel hooks and hardware provide the most durable single pole rack system on the market. This system includes everything needed for installation, except the actual concrete foundation to anchor the pole. The single pole mount installs quickly using special splicing kits, easy to use clamps and universal HD sliding rails. The rack can hold up to large 6 panels (265 watts and larger) and adjusts to four different degree angles. Changing the pole mount’s angle is easy using the convenient U bolt and pitman arm.
$155.0060 Amp 24V to 12V DC-DC Converter ETA June
This compact step-down DC-DC converter has an input voltage of 24 VDC nominal (range 20 VDC to 37 VDC) to a highly regulated output voltage of 12 VDC nominal at 60 Amps. This a non-isolated 60 amp DC-DC converter and is made for use in negative ground systems. These units have CE EN61000-6-3:2007+A1:2011 and CE EN61000-6-1:2007
$529.00Battery Cabinet – Industrial Grade – Fits up to 4 Batteries
This heavy duty, industrial battery enclosure is built to store up to 4 8D batteries or a mix and match of batteries and inverter. It comes with a battery output cable and volt/amp meter for easy set up.
$46.00Universal Adjustable Solar Panel Mount – Fits 1 panel
This single solar panel universal mount fits any solar panel and can be mounted almost anywhere. The preassembled legs with included base allow for quick installation and minimal labor. The angle easily adjusts using the rear legs and tilt system. This allows for optimal sunlight according to location. Built with heavy duty aluminum material, stainless steel hardware and backed by a 10 year warranty. You can rely on this mount to withstand the environment, protecting your solar investment. Perfect for applications such as RV, boat, and roofs.
$379.00AGM 12V 200Ah Deep Cycle Battery Heavy Duty ETA End of May
This 12V AGM battery is a heavy duty, deep cycle battery ideal for back-up power, golf carts and stored power applications. Affordable without compromising quality, this battery will provide power for years. This heavy duty rechargeable battery is made of AGM lead lead dioxide technology. The extra thick lead plates in this battery allow for a deeper discharge with less harm to the battery and provides 20% more charge/discharge cycles compared to other AGM batteries. AGM batteries have less instant energy, but greater long-term energy delivery. The dilute sulfuric acid electrolyte is absorbed by separators and plates, thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape, avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak-proof and usable in any position. Perfect for applications requiring large amounts of power and much longer run time.
$252.00AGM 6V 225Ah Deep Cycle Battery Heavy Duty
This 6V AGM battery is a heavy duty, deep cycle battery ideal for back-up power, golf carts and stored power applications. Affordable without compromising quality, this battery will provide power for years. This heavy duty rechargeable battery is made of AGM lead lead dioxide technology. The extra thick lead plates in this battery allow for a deeper discharge with less harm to the battery and provides 20% more charge/discharge cycles compared to other AGM batteries. This AGM battery has less instant energy, but greater long-term energy delivery. The dilute sulfuric acid electrolyte is absorbed by separators and plates, thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape, avoiding excessive pressure build-up. Otherwise, the battery is completely se… Read More
$749.00Lithium Battery 12V 200Ah LiFePO4 Lithium Iron Phosphate with Bluetooth Monitoring
The Lithium 12V 200Ah LiFePO4 Battery with Bluetooth Monitoring from AIMS Power is a member of our new battery product line of LiFePO4 batteries. The LiFePO4 batteries maintain constant output voltage, providing more efficient power. This allows the cell to deliver virtually full power until it is fully discharged without harming the battery. This advanced battery can greatly simplify or even eliminate the need for voltage regulation circuitry.
$40.00Inline fuse kit 50 AMP Fuse and Holder
Overview: Protect your batteries with our high current ANL fuse kits. Features: Includes ANL 80 amp inline fuse and holder. Use with 6-8 AWG cable. You may also want to consider purchasing a shorter cable 6″ or 12″ in length to connect the fuse and holder to the positive terminal of the battery. Can be connected in parallel. Holder post size: 9/32″
$649.00555 Watt Solar Panel Monocrystalline
The 555 Watt Monocrystalline Solar Panel from AIMS Power is a versatile performer constructed with tempered glass and a stronger surface to protect from harsh weather conditions. The solar cells used in the panel provide high light transmission and the textured glass allows for more efficient power solar harvesting. The panel also includes a bypass diode that minimizes the power drop caused by shade. Easy to install using the pre-drilled holes on the aluminum outer frame. Perfect for home, business and industrial applications for back up or off grid power. You can also use to tie to the grid or with our hybrid inverters. Packed with power. Includes 12″ cable with female and male MC4 compatible connectors.
$390.00Solar Array Combiner Box 60A 200Vdc 3 String – 10KW Prewired
The AIMS Power Solar Array Combiner Box provides a convenient solution for large PV solar array installations. The Combiner Box is exactly that… a box that serves as a central location for multiple input to a single output load. At 10KW/20KW output and 200Vdc input, this pre-wired box, with MC4 input and output connectors and a NEMA waterproof case is a must have for off-grid and grid tied systems. Ideal for larger solar arrays/high current systems, easing the hassle of dealing with several wires and combines all wires into one place for simple installation and maintenance. The combiner box eliminates the need for extra equipment such as output breakers, branch connectors and disconnect switches. The convenient MC4 connectors eliminate the need to hardwire, allowing for a quick plug and use solution.
Barry P. Battery Specialist • OnlineHi there! 👋 How can I help you today?















